Designed to be low maintenance

HOW TO CLEAN STONE VENEER

ProVia manufactured stone veneer offers beautiful curb appeal with minimal maintenance. How to clean stone veneer best is by removing dirt or debris, which can typically be done using a light spray or rinse with water. If stubborn dirt persists, wet the stone using a spray bottle filled with warm water and a bit of mild detergent, and scrub gently with a soft-bristled brush. Be sure to rinse off any residue from the detergent.

If moisture is present behind the stone, it can migrate to the surface and deposit salt, creating a white stain called efflorescence that may dissolve on its own when the moisture is controlled.

Do not use wire brushes, acids or vinegars to clean your manufactured stone veneer, and do not pressure wash or sandblast. Sealing is not required or recommended; if you choose to use a sealant, make sure it is a silane siloxane-based breathable masonry sealer. Test on a small inconspicuous area first.

Dust that gathers on interior stone surfaces may be removed with light suction using your vacuum’s brush attachment.

Imagine the possibilities

MANUFACTURED STONE PROFILES

ProVia offers stone veneer styles that enable you to achieve whatever design aesthetic you desire.

Limestone

Fieldstone

Ledgestone

Dry Stack

River Rock

Ridge Cut

Edge Cut

Chisel Cut

Terra Cut

Natural Cut

PrecisionFit

Thin Brick

LIFETIME LIMITED WARRANTY

ProVia’s stone veneer carries a Lifetime Limited Warranty from the date of purchase and is warranted against chipping, flaking, unsightly discoloration, or any other serious deterioration as a result of defects in material or manufacturing.

View ProVia Stone Warranty

The quality of ProVia’s manufactured stone is evident from our Lifetime Limited Warranty and the products’ certification by the National Concrete Masonry Association. ProVia was one of the first stone manufacturers to receive the CMHA Certified MSV Product designation. ProVia manufactured stone is compliant with Uniform Evaluation Services within The IAPMO Group for conformity and workmanship in precast manufactured stone.